Klein-tools CL2200 Manuel d'utilisateur télécharger pdf (Page 2)

ENGLISH

CL2200

Instruction Manual

GENERAL SPECIFICATIONS

The Klein Tools CL2200 is a True RMS, auto-ranging clamp meter. It

measures AC / DC voltage, AC / DC current, resistance, capacitance,

frequency and duty cycle. It can also test non-contact voltage, diodes, and

continuity.

•

Operating Altitude:

2000 meters

•

Humidity:

80% max

•

Operating Temperature:

0°C / 32°F to 45°C / 113°F

•

Storage Temperature:

-20°C / -4°F to 60°C / 140°F

•

Dimensions:

7.65" x 2.56" x 1.375"

•

Weight:

11.9oz.

•

Calibration:

Accurate for one year

•

CAT Rating:

CAT IV 600V

•

Accuracy:

± (% of reading + # of least signiﬁ cant digits)

WARNINGS

To ensure safe operation and service of the tester, follow these instructions.

Failure to observe these warnings can result in severe injury or death.

•

Before each use, verify meter operation by measuring

a known voltage or current.

•

Never use the meter on a circuit with voltages that exceed the

category based rating of this meter.

•

Do not use the meter during electrical storms, or in wet weather.

•

Do not use the meter or test leads if they appear to be damaged.

•

Ensure meter leads are fully seated, and keep ﬁ ngers away from

the metal probe contacts when making measurements.

•

Do not open the meter to replace batteries while the probes

are connected.

•

Use caution when working with voltages above 60V DC,

or 25V AC RMS. Such voltages pose a shock hazard.

•

To avoid false readings that can lead to electrical shock,

replace batteries if a low battery indicator appears.

•

Unless measuring voltage or current, shut off and lock out

power before measuring resistance or capacitance.

•

Always adhere to local and national safety codes. Use individual

protective equipment to prevent shock and arc blast injury where

hazardous live conductors are exposed.

SYMBOLS

AC Alternating Current Warning or Caution

DC Direct Current Dangerous levels

DC/AC Voltage or Current Double Insulated Class II

Ground

Safe for disconnect

from live conductors

AC Source

1 2 3 4 5 6 7 ... 23 24

Commentaires sur ces manuels

Pas de commentaire

Klein-tools CL2200 Manuel d'utilisateur Page 2

Commentaires sur ces manuels

Produits connexes et manuels pour Instruments de mesure Klein-tools CL2200